30% Seasonal Sale · Ends Sunday 13th December 2026 · Pre-Christmas Installation Guaranteed

PIR-INSULATED SOLID ROOFS FOR SUITABLE LEAN-TO CONSERVATORIES

A solid roof solution. Beautiful inside and out.

Discover our PIR-insulated solid roof system, finished with weather-resistant EPDM rubber outside and a beautiful new ceiling inside, subject to survey and suitability.

Get an EPDM Instant Quote

Roof replacement is subject to survey, design and any applicable building-control requirements.

  • PIR

    rigid roof insulation

    specified for the replacement build-up

  • EPDM

    external rubber membrane

    the waterproof outer finish

  • LED

    modern ceiling lighting

    where included in the order

  • Inside + out

    complete roof transformation

    for suitable lean-to conservatories

Real photographs · The current CIUK solid-roof method

From an old glazed roof to a beautifully finished insulated room.

These are genuine photographs from a CIUK lean-to conservatory transformation. Follow the new solid roof from the removal of the original glazing, through PIR insulation and external EPDM, to the beautifully finished internal ceiling and modern LED lighting.

Out with the oldExisting roof glazing removed
Solid & insulatedPIR build-up and exterior EPDM
Beautiful indoorsWhite ceiling and recessed LEDs
  1. Stage 01BEFORE

    The starting point

    The original conservatory roof

    We begin by assessing the existing lean-to roof, including its glazing or polycarbonate sheets and the structure that supports them. This helps the team plan the replacement appropriately for the property.

    Original roof panels — before replacement
  2. Stage 02PREPARATION

    The rebuild

    Old roof sheets removed

    Rather than simply covering the glass or polycarbonate, the original sheets are taken out. The new solid roof is built around the assessed structure, with the construction and support requirements checked for the job.

    The exposed solid roof structure, viewed from inside
  3. Stage 03INSULATION

    Thermal performance

    Rigid PIR insulation goes in

    The solid replacement incorporates rigid PIR insulation, selected and installed to the agreed roof specification. The photographed foil-faced insulated layer is part of the build-up that helps reduce unwanted heat transfer.

    Actual foil-faced insulated roof build-up
  4. Stage 04ROOF DECK

    A firm foundation

    The new solid roof deck

    Roof decking provides a firm, continuous base for the external waterproofing system. The team prepares the surface and junctions ready for the EPDM membrane and perimeter finishing details.

    Solid roof deck before the EPDM covering
  5. Stage 05OUTSIDE

    Weatherproof finish

    EPDM membrane and finishing details

    The exterior is completed with a dark EPDM rubber membrane, with careful attention to the edges, trims and roof-to-wall junction. The result is a clean, weather-resistant solid roof finish.

    The completed external EPDM roof
  6. Stage 06INTERIOR

    Working inside

    Preparing the insulated ceiling

    Back inside, the reflective insulation-facing and supporting battens are prepared for the internal ceiling system. This hides the roof construction behind a smart, finished surface.

    Real insulation-facing and ceiling framework
  7. Stage 07CEILING

    The transformation

    Modern white ceiling cladding

    The team fits the neat white ceiling panels and trims to create a bright, clean-lined interior. It transforms the appearance of the conservatory as dramatically as the new roof transforms the exterior.

    Completed internal white insulated ceiling
  8. Stage 08LED LIGHTING

    The finishing touch

    Completed ceiling with modern LED lights

    The finished insulated ceiling can incorporate contemporary recessed LED downlights, where specified in the order. Carefully positioned lighting gives the conservatory an attractive, practical finish for evenings as well as daytime.

    Finished white-clad ceiling with LEDs switched on

The transformation, complete

A protected roof outside. A stunning new ceiling inside.

The durable exterior EPDM finish and modern white-clad ceiling work together as part of one complete conservatory transformation.

Suitability and building regulations: Replacing a glazed conservatory roof with a solid insulated roof can require structural checks and building-control approval. The specification, insulation details, electrical work and any necessary approvals should be assessed for each property. LED lighting is included where specified in the customer's order.

Why EPDM

EPDM rubber roof benefits

A genuine roof replacement

The old glass or polycarbonate roof sheets are removed. CIUK constructs a replacement solid roof system rather than simply covering over the original glazing.

Rigid PIR roof insulation

A specified PIR rigid-insulation build-up helps reduce heat transfer through the roof. Thickness and construction depend on the survey and project design.

Durable external EPDM finish

The roof is completed with a professional EPDM rubber membrane and carefully finished edges, trims and roof-to-wall junctions.

A beautiful new internal ceiling

A contemporary, clean-lined white ceiling gives the conservatory a bright and carefully finished appearance from the inside.

Optional recessed LED lighting

Where included in your order, modern LED downlights provide a smart, functional finishing touch to the new ceiling.

Assessed for the property

The replacement roof and its supporting structure are assessed for suitability. Relevant building regulations and required approvals are considered for the specific project.

Earlier CIUK installation film · Watford

This historic film has been retained to show real CIUK workmanship on an earlier EPDM job. The current replacement method using rigid PIR insulation and the new internal ceiling is demonstrated in the photographs above.

Archive video · Earlier CIUK roof method

A look back at an earlier EPDM installation

This genuine CIUK film documents an earlier project in Watford. The photos above show the current solid-roof replacement method with PIR insulation, EPDM exterior, modern interior cladding and LED lighting. The video is presented as a historic example of workmanship rather than the specification for every new job.

EPDM rubber roof installation is only available on lean-to style conservatories.

Step 1 · Measuring and preparing the roof

Step 1 · Measuring and preparing the roof

0:00 / 6:51
  1. 01

    Step 1 of 5

    Measuring and preparing the roof

    An installer working at the edge of a conservatory roof

    Precise measurement and thorough inspection

    Our team starts by taking precise measurements of your existing roof. Accurate dimensions are crucial for ensuring a perfect fit of the new materials.

    We conduct a comprehensive inspection to identify any damage or issues that need addressing before the installation.

    Detailed cleaning and preparation

    We meticulously clean the roof surface, removing any debris, dirt, or old roofing material. A clean surface is essential for the proper adhesion of the new layers.

    We carefully pull back the lead trimming to ensure it does not interfere with the installation and will be reinstalled seamlessly.

  2. 02

    Step 2 of 5

    Installing the OSB board

    OSB boards being fixed to a conservatory roof

    Custom cutting of OSB board

    Our professionals cut the OSB (Oriented Strand Board) to the exact dimensions of your roof. Precision cutting ensures the board fits perfectly and provides a solid foundation for the EPDM membrane.

    Secure fixing of the OSB board

    We securely fix the OSB board to the roof structure using high-quality fasteners. Our team ensures the board is flat, even, and firmly attached to create a stable base for the subsequent layers.

    Also in this film: The film also shows the ceiling insulation going in inside the conservatory: treated timber battens, then the TLX quilted insulation.

  3. 03

    Step 3 of 5

    Laying the EPDM rubber membrane

    A dark EPDM rubber membrane being laid over OSB board

    Accurate cutting of EPDM membrane

    The EPDM rubber membrane is unrolled and allowed to relax, making it easier to handle. We then cut it to the required size, allowing for adequate overlap on all edges to ensure complete coverage.

    Applying adhesive and positioning the membrane

    We apply a high-quality adhesive to both the OSB board and the underside of the EPDM membrane.

    Our team carefully positions the EPDM membrane over the OSB board, smoothing it out to eliminate any wrinkles or air bubbles, ensuring a flawless finish.

  4. 04

    Step 4 of 5

    Sealing and testing

    An installer sealing the edge of an EPDM rubber roof

    Expert sealing of cracks and edges

    We use professional-grade sealant to seal all cracks and edges, ensuring a watertight finish. Attention to detail in this step is crucial for preventing leaks.

    The lead trimming is pushed back into place, perfectly covering the edges of the EPDM membrane and securing the roof.

    Comprehensive water tightness testing

    Our team conducts thorough water-tightness tests to confirm there are no leaks or weak spots. We ensure every inch of the roof is sealed and secure.

    We perform a final inspection, checking that all areas meet our high standards.

    Also in this film: Back inside, the film shows the white shiplap ceiling and the spotlights being fitted.

  5. 05

    Step 5 of 5

    Finalising

    A finished lean-to conservatory with a new dark EPDM rubber roof, seen from the garden

    Professional clean-up

    We clean the roof surface and the surrounding area, removing any excess materials and debris. Our goal is to leave your conservatory roof looking pristine.

    A final inspection is carried out to ensure the roof is not only functional but also aesthetically pleasing.

  6. Your finished roof

    Much like any other type of roof, flat roofing requires care and maintenance to ensure a long, trouble-free life. If you notice a leak or loose material, we can replace your roof.

    Get My Instant On Screen Quotation

What you get

EPDM rubber roofing with unique properties

  • Original glass or polycarbonate removed
  • Rigid PIR solid-roof insulation
  • External EPDM weatherproof finish
  • Insulated build-up designed for the property
  • Modern white internal ceiling cladding
  • Optional recessed LED downlights
  • Professional attention to edges and junctions
  • Flame-free membrane bonding where specified
  • Building-control requirements assessed per project

Our work

Some of the rubber roofs we have installed

Tap a photo to see it larger.

Good to know

Questions about EPDM rubber roofs

More questions? See all FAQs or call 0800 061 4058.

Ready to talk EPDM?

A roof fitted with care. A conservatory ready to enjoy.

For suitable lean-to conservatories, ask about our solid roof replacement with PIR insulation, external EPDM rubber and a new internal ceiling with LED downlights where specified.